Product comparison

Pros & Cons

  • Ultra narrow 25mm grip diameter section
  • High density EVA grip sections on the front arch for maximum abrasion resistence
  • Very high stiffness to avoid sail distrotion under load
  • Only compatitible with Unifiber Modular "Configure Me" RDM & SDM Compatible High Performance Boom Head

Windsurf Boom Specifications

Compare Product Construction Stiffness Grip Diameter Tube Wall Thickness Boom Tail Inner Width Weight +/- 6%
Carbon Elite Monocoque Body 140 Slim Carbon Prepreg 100% ******* 25x29 mm 2 mm 1.25 kg

Looking for a specific product specification?

Check out an extensive overview of all the available specifications.

FAQ

How do Unifiber measure boom diameter thickness?
Unifiber measure their quoted tube diameter – not including the EVA grip - in the centre of the harness line area. This is because the grip thickness can vary over time and also because some models feature a tapering of thickness over the boom length.
What does 1 Year Unconditional + 1 Year Conditional warranty cover?
Warranty is valid 2 years after date of purchase. When making a warranty claim in the first year the product is unconditionally warranted. When making a warranty claim in the 2nd year the product must have clearly suffered from a manufacturer error.
Can I use a boom fully extended?
Yes, both Unifiber aluminium and carbon booms can be fully extended. In both construction options there is no increased risk of breaking the boom as well the booms stiffness will remain at an acceptable level.
How tight should I screw on the performance bolts?
In most cases, the perfect tension is when the spacers just touch the boomhead's plastic on both sides. Taking into account manufacturing tolerances, this rule might not always work. Tighten the bolts firmly, but don't overdo it. When you notice any deformation of the plastic around the screw holes, don't tighten any further. Too loose and you might lose the nut while sailing. Too tight and you might damage the boomhead.