Product comparison

Pros & Cons

  • Added profile thickness to comensate antiweed rake ensuring "normal" fin behaviour as close as possible
  • Blade position moved forward to compensate antiweed rake ensuring "normal" fin behaviour as close as possible
  • 3M Adhesive strip to fill up possible gap between fin blade and board

Windsurf Fin Specifications

Compare Product Fin Discipline Fin Area Fin Cover Weight (kg)
Weed Slasher G10 28 cm Power Box Antiweed 307 cm2 Yes 0.536 kg
Weed Slasher G10 28 cm Tuttle Box Antiweed 307 cm2 Yes 0.582 kg
Weed Slasher G10 30 cm Power Box Antiweed 336 cm2 Yes 0.582 kg
Weed Slasher G10 30 cm Tuttle Box Antiweed 336 cm2 Yes 0.652 kg
Weed Slasher G10 32 cm Power Box Antiweed 370 cm2 Yes 0.611 kg
Weed Slasher G10 32 cm Tuttle Box Antiweed 370 cm2 Yes 0.676 kg
Weed Slasher G10 34 cm Power Box Antiweed 399 cm2 Yes 0.658 kg
Weed Slasher G10 34 cm Tuttle Box Antiweed 399 cm2 Yes 0.71 kg
Weed Slasher G10 36 cm Power Box Antiweed 429 cm2 Yes 0.71 kg
Weed Slasher G10 36 cm Tuttle Box Antiweed 429 cm2 Yes 0.734 kg
Weed Slasher G10 38 cm Power Box Antiweed 475 cm2 Yes 0.804 kg
Weed Slasher G10 38 cm Tuttle Box Antiweed 475 cm2 Yes 0.856 kg
Weed Slasher G10 40 cm Power Box Antiweed 517 cm2 Yes 0.827 kg
Weed Slasher G10 40 cm Tuttle Box Antiweed 517 cm2 Yes 0.931 kg

Looking for a specific product specification?

Check out an extensive overview of all the available specifications.

FAQ

My tuttle box fin does not fit well in my board. It is too lose or too tight, what can I do about it?
The universal fin box width for tuttle box and deep tuttle box should be 16mm. We have done extensive research around the year 2014 finding out the the average width which is accomodated by the board which are by the way mostly manufactured by Cobra International - Thailand is 15,83mm. This said we have come accross boardbrands touching ranging from 15,3 till 16,1mm width!! Ever since we are producing tuttle and deep tuttle boxes based on this average figure to maximize the probability of fitting the fin well in any type of board regardless the boardbrand. When you suffer from a (deep) tuttle fin which is too lose it is most likely the board fin box is wider then the average of 15,83mm. This can cause the fin to be "sucked in" the board a little when tighting screws. When this happens there is not a large disadvantage in terms of spin-out sensitivity simply because the space will be filled by water which can not escape so a water on water film. When you suffer from a (deep) tuttle fin which is too tight it is most likely the board fin box is thinner then the average of 15,83mm. You might want to sand off the side flanks of the (deep) tuttle box fin to make it fit. Make sure to sand off equal sides. Last but not least please take in consideration the psychological factor: board (+/- EUR 2.000 retail value ) against fin (+/- EUR 150 retail value) it is tentative to look at flaws of the fin because it the retail value is much lower while from experience it is 9 out 10 situations it is the board box width not in tolerance.
What does 1 Year Unconditional + 1 Year Conditional warranty cover?
Warranty is valid 2 years after date of purchase. When making a warranty claim in the first year the product is unconditionally warranted. When making a warranty claim in the 2nd year the product must have clearly suffered from a manufacturer error.