Boardbag Pro Luxury
Whether you're embarking on a journey abroad or heading to your local windsurfing spot, your gear needs to arrive safe and ready for action.
Our Pro Luxury boardbag range, consisting of 11 different sizes, is tailored to provide optimal protection for your windsurfing boards.
Manufactured using a high-quality tarpaulin material with a robust Water-Repellent Polyester (WRP) fabric on the top surface, along with PVC nose and tail reinforcements. Additionally, each bag is equipped with 6mm padding to offer enhanced protection.
The primary zipper is positioned away from the edges, preventing any scratching or damage to the tail when the board is stored upright.
Moreover, a secondary zipper at the back enables you to store the board without the need to remove the fin. Additionally, the board bag includes a convenient zip-closed pocket where you can securely store screws and tools.
Pros & Cons
- Separate fin compartment
- Despite white surface area, it's easy to keep the boardbag clean
- Because of the position of the zipper, it won't scratch the board when storing the board straight-up
- The additional carry handle is convenient when you need to carry wider boards
- The thick padding and strong outer layer protect your board well
Windsurf Bag Specifications
Looking for a specific product specification?
Check out an extensive overview of all the available specifications.
FAQ
- What does 1 Year Unconditional + 1 Year Conditional warranty cover?
- Warranty is valid 2 years after date of purchase. When making a warranty claim in the first year the product is unconditionally warranted. When making a warranty claim in the 2nd year the product must have clearly suffered from a manufacturer error.
- Which boardbag size I should choose?
- Important note: the size indication of the boardbag is based on the board that goes into the bag, not on the bag itself. The boardbag itself is bigger to accommodate the thickness of the board and we assume that you don't want to remove the footstraps after each session. If you want to be sure your board fits, check the inner width and inner length of the boardbag under ‘all specifications’ on our website. Wrap a measuring tape around the widest section of the board (over the front footstraps) and do the same along the length of the board. Divide both measurements by 2. Now you have the minimal required inner width and inner length for your boardbag. We advise choosing your boardbag to be relatively tight. Left-over bag space can be more inconvenient than you might think.